Product Detail
 
[ view full size image ]
 
Product Details
Stock CodeCH4
Pack/QtyEA
 
Markup Group
 
Downloads
Download Cutsheet
 
Print Product Sheet
Crown Audio, Inc.
CH SERIES 1200W/CH @ 70V

SPECIAL **WAS $6599 RRP**

1200 Watts / Ch @ 70volt / 1200 Watts -Ch @ 4ohms / Highpas Filter

Looking for a quality, constant voltage and low impedance two channel amplifier for your restaurant, nightclub, retail store, school or house of worship projects Crowns Contractor Series CH/CL amplifiers are designed just for you.

With an incredibly wide range of power and feature/benefits, the new CH/CL Contractor Series amplifiers give the professional sound contractor more options. Crown quality is available at the best dollar-per-watt ratio on the market.

Features:
CH SERIES DRIVES MULTIPLE IMPEDANCES
- CH Series provides for both low impedance or high impedance outputs per channel.
- Each channel offers 4/8 ohm, 70V and100V operation on CH1 and CH2, and 4/8 ohm and 70V on CH4.
- Loads can be mismatched, allowing for independent operation per channel.
CH SERIES INCLUDES HPF PER CHANNEL
- All CH Series include a 70 Hz High Pass Filter per channel, providing necessary low frequency roll off to eliminate saturation of constant voltage step down transformers typically used in 70V and 100V distributed systems.
SHALLOW CHASSIS DESIGN
- The CH 1, CH 2, and CL 1, and CL 2 use shallow chassis, allowing for installation in most wall-mount equipment racks.
SECURITY
- Rear panel level controls for secure operation.
- Precision detented level controls allow for accurate level settings in many fixed installation applications.
CONTRACTOR CORRECT CONNECTORS
- Barrier strip output connectors allow for quick easy connection, regardless of the load.
- Barrier strips accept up to 10 Awg. crimp-on terminal forks.
5-WAY FAULT INDICATOR
1) blinks during power-mute;
2) excessive heatsink temperature;
3) transformer thermal protection;
4) short at amplifier output;
5) output stage non-operational.
FLEXIBLE INPUT OPTIONS
- Active crossover with signal routing available with optional System Solution Topology
modules (SST-SBSC, SST-SX and SST-MX).
CL SERIES AND 2 OHM OPERATION
- When low impedance is the only requirement, the CL Series includes high power 2 ohm operation.
THE BEST VALUE ON THE MARKET
- Dollar per Watt comparisons in this class prove how the new CH/CL Series
 

Copyright © 2005 Jands - All Rights Reserved | Terms & Conditions
[ site by blackpepper ]